Current location: Home > Products > Microphone
Multimodal Conference Host
Features:
1. Adopt high-speed RISC embedded digital processor to improve system running speed and ensure system stability.
2. The system adopts professional 6-core wire connection, and the transmission distance between devices can reach 150 meters.
3. The sampling frequency reaches 48K, and the frequency response reaches 20Hz-20kHz, achieving CD-level sound quality.
The 4.3.5-inch color capacitive touch screen can centrally control and manage all conference functions, and display Chinese/English menus.
5. Input channels include noise gate\gain\phase\mute\delay and 31-segment parametric equalization; output channels include high and low-pass filter\delay\phase\mute\compressor and 10-segment parametric equalization.
6. The system can customize the conference unit number, which can effectively avoid ID address conflicts.
7. Super anti-interference ability of mobile phones, no noise will be generated when incoming calls; support to restore factory settings.
8. The system has the function of "hot swapping" when the line is live, and the security and stability of the system are effectively guaranteed.
9. The audio input of the conference unit can realize separate or mixed output, and can realize the function of partition output audio.
10. Can be connected to PC computer\central control system; support camera tracking function; support external panel control port.
11. With speaker identity setting, speaking time setting, volume adjustment and other functions.
12.4-way conference unit input port, supports up to 120 units
13. Six microphone management modes: quantity limit mode\first in first out mode\speaking queuing mode\voice activation mode\application speech mode\free speech mode.
14. The host has feedback suppression function
15. The host provides a network-based voice transcription interface.
16. The host supports software upgrade function.
17. Aluminum alloy panel and sheet metal body, built-in anti-static treatment, can resist 8000V static electricity.
Multimodal Conference Unit (NAJA S303P)
Features:
1. Built-in high-performance embedded CPU, faster processing speed, finely crafted structural design, exquisite surface treatment, fully reflect the exquisite craftsmanship of modern industry.
2. Top-grade gold film high-fidelity microphone capsule, guarantee of high-quality pickup, all-metal microphone rod design.
3. High sensitivity microphone, super cardioid pickup effect, the best pickup distance is 40-80CM.
4. With live "hot swap" function, short circuit protection function.
5. The microphone identity can be set through the host, which is more flexible to use, meets high-end needs, supports multiple chairmen online at the same time, and supports camera tracking function.
6. The ID number can be a unified number or a single number.
The 7.3.5-inch color touch display screen can also send commands to the background to realize the communication between the front and the back.
8. It has functions such as check-in, voting, voting, and scoring, and supports dynamic dial display time.
9. Have the microphone physical switch key.
10.1 Ø3.5mm stereo headphone jacks, participants can choose to listen to speeches with headphones.
11. The system unit adopts 6-core shielded wire, and the T-shaped hand-in-hand connection makes the system connection easier and more reliable.
12. The system unit provides DANTE digital output interface
13. The system unit provides XLR analog output interface
Multimodal Conference Unit (NAJA S303)
Features:
1. Built-in high-performance embedded CPU, faster processing speed, finely crafted structural design, exquisite surface treatment, fully reflect the exquisite craftsmanship of modern industry.
2. Top-grade gold film high-fidelity microphone capsule, guarantee of high-quality pickup, all-metal microphone rod design.
3. High sensitivity microphone, super cardioid pickup effect, the best pickup distance is 40-80CM.
4. With live "hot swap" function, short circuit protection function.
5. The microphone identity can be set through the host, which is more flexible to use, meets high-end needs, supports multiple chairmen online at the same time, and supports camera tracking function.
6. The ID number can be a unified number or a single number.
7. Have the microphone physical switch key.
8.1 Ø3.5mm stereo headphone jack, participants can choose to use headphones to listen to speeches.
9. The system unit adopts 6-core shielded wire, T-type hand-in-hand connection, the system connection is easier and more reliable.
10. The system unit provides DANTE digital output interface
11. The system unit provides XLR analog output interface
Multimodal Conference Host (YH)
Frequency Response | 20-20KHz | Crosstalk Attenuation (4kHz) | >80dB |
Signal to Noise Ratio | 102dB | Automatic Gain Reduction | 2 The microphone is turned on and reduced by 3dB;4 Mic on, 6dB lower |
Dynamic Range | 106dB | Master Gain Control | 15×1dB and offff (mute) |
Harmonic Distortion | <0.5% | Line in/out Level | -18dBV/+12dBV (standard/max) |
Overload Harmonic Distortion | <1% | Recording input/output Level | -33dBV/-3dBV |
Output Impedance | 470Ω | Input Channel | 4-way 6PDIN+1-way XLR(with phantom power supply) |
Unit Connector | 6 cores large DIN*4 | Output Channel | 3-way Phoenix terminal + 1-way XLR |
Communication Port | RJ45*1RS232*2RS485*1 | Power Consumption | Stand-alone 25W,maximum load 350W |
Control Panel | 3.5 inch capacitive touch screen, Resolution 480*320, Chinese and English | Chassis Size |
Multimodal Conference Unit (NAJA S303P)
Pickup | 14mm capacitive gold-plated membrane microphone | Microphone Size | 232mmx37mmx25mm |
Sensitivity | -34dB±2dB | Base Size | 149mmx94mmx55mm |
Pointing Feature | supercardioid | maximum Soundpressure Level | 110dB(3%T.H.D.@1kHz, 0dBSPL=2x10Pa) |
Output Impedance | 200 ohms | Equivalent Noise Level | <25dBSPL(A) |
Maximum Powerconsumption | <2.5W | Overload Harmonic Distortion | <1% |
headphone Load | 32Ω-2KΩ | Headphoneoutput Interface | Ø 3.5mm stereo jack |
Headphone Volume | 10mW | Screen Resolution | 640x480 |
Frequency Response | 20Hz-20kHz; 125(-6dB)-14kHz(-3dB) |
Multimodal Conference Unit (NAJA S303)
Pickup | 14mm capacitive gold-plated membrane microphone | Microphone Size | 232mmx37mmx25mm |
Sensitivity | -34dB±2dB | Base Size | 149mmx94mmx55mm |
Pointing Feature | supercardioid | maximum Soundpressure Level | 110dB(3%T.H.D.@1kHz, 0dBSPL=2x10Pa) |
Output Impedance | 200 ohms | Equivalent Noise Level | <25dBSPL(A) |
Maximum Powerconsumption | <2.5W | Overload Harmonic Distortion | <1% |
headphone Load | 32Ω-2KΩ | Headphoneoutput Interface | Ø 3.5mm stereo jack |
Headphone Volume | 10mW | Frequency Response | 20Hz-20kHz; 125(-6dB)-14kHz(-3dB) |
(Suitable for large, medium and small meeting rooms, courts, multi-purpose halls, etc)
+86-13302998794
9th Floor, 1B, Shangzhi Technology Park, Guangming District, Shenzhen City, Guangdong Province, China
Copyright © SHENZHEN S-TRACK SCIENCE & TECHNOLOGY CO., LTD.
Sitemap