This product supports two sets of balanced I/O analog signals through the local area network access to the Dante system, the input interface using two-in-one XLR socket, providing phantom power switch, input signal gain adjustment function, you can access a higher quality condenser microphone. The output interface is a standard three-core XLR socket, outputting a balanced analog signal. Back network interface, please use Category 5 or above shielded twisted pair cable to connect the POE switch.
| Input interfaces | 2×3-pin XLR female connectors;
1×RJ45 connector for transmitting 2 channels of Dante network audio |
| Output interfaces | 1×RJ45 connector for transmitting 2 channels of Dante network audio;
2×3-pin XLR male connectors |
| Phantom Power | DC 48V |
| Input Impedance (Balanced) | 20kΩ |
| Output Impedance (Balanced) | 100Ω |
| Common Mode Rejection | 60dB @50 Hz |
| Dynamic Range | ＞100dB |
| Frequency Response | 30Hz～20kHz, ±0.5dB |
| Noise Floor | -90dBu |
| Signal-to-Noise Ratio | ＞100dB |
| THD+N | ≤0.005%@1kHz, +4dBu |
| Channel Isolation | ＞100dB @1kHz |
| Maximum Output Level | 20dBu |
| Maximum Input Level | 18dBu |
| Sampling Rate | 48kHz |
| Bit Depth | 24-bit |
| Network Transmission | Dante IP/AES67/RTP Audio |
| Dante Device Latency | 1、2 or 5ms (Dante Controller Configuration) |
| Power Supply | 802.3af、802.3at Standard POE switch |
| Power Consumption | 5W |
| Operating Temperature and Humidity | 0℃～40℃, 10%～90%RH, No condensation |
| Product Dimensions (L×W×H) | 120mm×117mm×57mm |
| Weight | 0.63kg |
| Package Dimensions (L×W×H) | 145mm×145mm×80mm |
| Package Weight | 0.73kg |
Conference room, multi-functional hall, reserved for hidden input and output interfaces.
400-900-2726
9th Floor, 1B, Shangzhi Technology Park, Guangming District, Shenzhen City, Guangdong Province, China
Copyright © SHENZHEN S TRACK SCIENCE TECHNOLOGY CO., LTD
